How to Use The GE Dishwasher Dry Only Option

How to Use The GE Dishwasher Dry Only Option

Many GE dishwasher owners often wonder whether or not they can use the GE dishwasher dry only as a standalone action. This can be because some homeowners like to hand-wash their dishes or other items and then dry them with the machine or because they have clean wet dishes that only need to be dried.

But whatever the case might be, running the dishwasher through a drying cycle only is something that many people want to know, and if you are reading this, then you are probably amongst these people.

Hence, in the sections below, we will consider whether this is possible, how you can run your GE dishwasher through a dry cycle, and how the whole thing works.

Can You Use GE Dishwasher Dry Only Option?

Sadly, the answer is no; you cannot use the GE dishwasher dry only as a standalone cycle as the machine requires you to progress from washing to drying. Like all dishwashers, the operation goes from washing to drying. Hence, activating the drying cycle without washing will not work.

People often seek to use this feature for different reasons, but some of the most common ones include:

Saving Time and Energy

Dishwashing is often a whole process beginning with pre-washing and ending with stacking the dishes carefully away. This is sometimes difficult labor for most people and takes a lot of time and effort.

The dry-only option is targeted at eliminating every operation up to the point of drying the dishes to put them away. And when most people seek to use this feature, it is so that they can save time and energy, especially when the dishes have been washed at an earlier time.

Removing Left Over Moisture

Another reason some may want to deploy only the dry cycle is to remove the moisture left on the dishes after an initial drying cycle.

Sometimes, after a complete washing cycle, some dishes do not completely lose moisture, and storing them in that state is usually not ideal as the wet dishes may attract dirt and stains quickly. The dry-only option can quickly evaporate any remaining water spots on the dishes.

For Convenience

In some cases, the dry-only option is needed to make dishwashing a more convenient exercise. A regular washing cycle uses regular air drying to strip your dishes free of water. This requires waiting some time before the dishes can be removed and used.

In the case where the homeowner is in a hurry to use those dishes, the dry-only feature becomes the most convenient way to get the job done quickly and efficiently.

For Hand-Washed Dishes

Some dishes are not designed to go into dishwashers and often require you to wash them outside the machine. This alone is a daunting task for many people. Naturally, one would need towels to properly wipe those dishes free of moisture before storage or use.

This can only add to the stress of hand-washing each dish, making the operation even more challenging. By using the dry-only option, you can easily eliminate the need for towel drying and cut down the time of doing these types of dishes.

How Do You Run a Dry Cycle on a GE Dishwasher?

Now that we have established that it is impossible to run the dry-only cycle without first running the washing cycle, below are the steps to run the GE dishwasher dry only option once you have completed washing:

Load the Machine

Now that you have washed your dishes and want to remove water from them immediately instead of allowing them to dry out naturally, the first thing to do is to load all the dishes and utensils into the racks. Proper arrangement and spacing are essential if you want all the dishes to dry properly.

Press the Dry-only Option

Next, locate the dishwasher control panel and select the dry only option. This can be labeled as “Dry Only” or “Heated Dry,” depending on the model of your GE dishwasher. If you experience any difficulty identifying this option, please check your owner’s manual for clarification.

Start the Drying Cycle

After selecting the dry-only feature, you can commence the drying cycle by hitting the “Start” or “On” button. Again, how this is labeled on your dishwasher depends on the model, but they mean the same thing and should get the process started. You may also need to follow specific prompts before drying can begin if your dishwasher works like that.

Wait for the Cycle to Complete and Unload the Dishes

Once you have started the drying cycle, the operation should take 20 minutes to 1 hour to complete. You can go ahead to run other tasks while you wait. Your dishwasher would usually indicate or give a signal when the process is complete.

You can then remove the dry dishes from the racks and store them properly. But you will need to be careful while opening the door or removing the dishes, as both the dishwasher and the dishes may still be hot at this stage.

How Does GE Dry Boost Work?

While not all GE dishwasher models boast of this option, the GE dry boost works by combining heat, a heated rinse aid dispenser, and fan-assisted circulation to enhance the drying process and ensure that your dishes come out thoroughly dry.

Using the heat and dedicated fan combination, these particular models of GE dishwashers activate a high-temperature heating element to create heat within the system.

They also use a heated rinse-aid dispenser during the final rinse after washing to ensure an optimal distribution of the heat generated by the heating element.

And finally, the fan-assisted circulation helps to circulate the hot air created by the heating element around the dishwasher’s interior, making it possible to reach every dish, utensil, or surface contained in the racks.

The dry boost aims to deliver consistently dry dishes each time you use this feature. It does this by providing an even amount of heat across the system, removing the water from all dishes, including plasticware. This makes it three times better than the regular drying cycle and efficient enough to dry even the most challenging items, such as glassware and plastics.

Some models of GE dishwashers with the dry boost option even offer customizable options that allow you to easily adjust the intensity of the drying cycle based on your preferences or drying load. That way, you can select a different duration for the drying cycle and pick different drying levels, including regular or extra dry.

Conclusion

Most GE dishwasher models offer the dry only option, but this can only be used by first running a washing cycle. However, it is still a helpful feature that can become very necessary when you need to run a quick-drying cycle or dry dishes that need to be dishwasher-safe.

It can also save you time and energy while leaving you with spotless dishes free of moisture. Some models even provide the dry boost option, which has proven more consistent and efficient than the regular drying cycle.

1 thought on “How to Use The GE Dishwasher Dry Only Option”

  1. Pingback: Does GE Dishwasher Come with Power Cord? – 3 Ways to Know What Power Cord You Need - Faulty Appliance

Leave a Comment

Your email address will not be published. Required fields are marked *